Tippmann TMC Tankstock
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=192437
Printed Date: 15 October 2024 at 11:01pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Tippmann TMC Tankstock
Posted By: spydercam
Subject: Tippmann TMC Tankstock
Date Posted: 27 August 2017 at 8:58am
Here i got some pics of a guy he build a straight ASA into the Hammer housing and dremelīd(milled) the channel for the gas line.   An other guy printed this ASA.   ------------- I like Tippmann !!! |
Replies:
Posted By: spydercam
Date Posted: 07 December 2017 at 10:30am
Here something i found in a german Forum:  Here the now already older one:    ------------- I like Tippmann !!! |
Posted By: spydercam
Date Posted: 20 December 2017 at 5:03am
Here i installed an old ASA to test the handling with tank stock 2.0 . Feels well and got a bit more of room for mask Frame. Here i made a draw of the ASA 2.0 which i donīt gonna build cause i got an old Version and my straight ASA isnīt bad too !!!  There is a Need to cut the lower Piece of the hammer housing. Also to get a stronger 2.0 ASA a cut at the bottom of the hammer housing is needed so itīs getting stronger against bad Forces, but this doesnīt weak your Bolt area and itīs not much and deep too. ------------- I like Tippmann !!! |