LA HITMAN PUMP HANDEL with how 2 guide

this is a mod i did to a wgp pump kit for when your playing really tight in a bunnker it like a trigger on your pump handel work well with an AUTO TRIGGER also


Ok

here what I did to make the hit man pump mod (this mod works best with wgp pump kits) I went in to my closet and found a wooden hanger with a thick metal ring at the top I pulled off the metal piece thought the wood part away

#1 most hangers I have a little not at the end if your dose go and cut it off

#2 now you have to straiten out the metal (I used a vice for this)

#3 now you start to bend the metal bend it right down the middle  

#4 now you got your shape

#5 is a side view now if you want you bottom end bent out a little bit put it in the vice and do so

#6 is also a side view put the two top ends in the vice (you want you ends that you are going to stick in to you pump to be about 1/2 to 3/4 an inch long) and bend those as




#1 you want to drill you holes evenly use a bit a little smaller then the with of you trigger (I used a dill press) make sure they are even and they are the same depth

#2 shows the 2 hole that have been drilled

#3 now put in you trigger (if it dose not go in all the way you might want to make you holes a little deeper)

#4 now you’re almost done put a little glue in the hole (a little) and put the trigger in wait tell it dries and you done

i whould think so you still have to pump it so ya

note almost all of the LA HITMEN use this mod on there sinper in the NSA

there are no stockclass tourney like that anymore all are just Limited paint ( 40 rounds) or open class pump where anything go as long as you have to pump it 

where do you live if you live in socal you should come out and play with us sometime

You've gotta get some pictures of the install in progress.

The end result is very clean though.

very cool. Thats a great idea

Thats some mighty fine engineering.

i wonder if i can fit that into a white wolf kit?

DeTrevni wrote: i wonder if i can fit that into a white wolf kit?

it counld be done just a littel more tricky thats all

Video of how it works?