|
m24 conversion for 98c? |
Post Reply 
|
| Author | |
Master. kirby 
Member 
Joined: 26 October 2004 Status: Offline Points: 21 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: m24 conversion for 98c?Posted: 26 November 2004 at 10:57pm |
|
Well since with a flatline handguard thing and the flat top I am greatly considering going for a m24 sniper rifle look. The problem is the trigger and the handle thing. So what I need to know if its possible (how) to move the trigger up to the stock and to entirly remove the handle thing. (reference for anyone that doesn't know what the m24 |
|
 |
|
|
action
Member
Guested - Spam Joined: 26 November 2004 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 November 2004 at 11:05pm |
|
I have two web sites to offer. www.opsgear.com and www.rap4.com |
|
|
|
|
Master. kirby
Member
Joined: 26 October 2004 Status: Offline Points: 21 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 November 2004 at 11:07pm |
|
.........................................
Ok, I am going to ask this again, in hopes that I don't get responses with 2 of the most known sites. Dose anyone know how or if its possible to reposition trigger or how to compleatly remove the hand holdy thing? Now first, i know what your going to say, and I don't mean just unscrewing about 3/4th I mean actual removal. |
|
|
|
|
Skorpion317
Member
Joined: 26 February 2004 Location: United States Status: Offline Points: 241 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 November 2004 at 11:52pm |
if you wanted to reposition the trigger, you'd have to change the internals as well. the trigger is in the perfect place to trip the sear. as for removing the grip, you'd have to mill it off. this involves cutting the grip off, sanding/polishing it down to the right size and smoothness, and repainting it. If you're going for a display piece, that's cool, but removing the grip is going to make it hard to shoot the gun. it won't really have a place to hold onto. |
|
|
98 Custom
Flatline Barrel Pro-Team Sniper F/X stock 32 Degrees Remote Line Response Trigger Ricochet 2K hopper Removed Front Grip Polished Internals Adco Imp red dot sight |
|
|
|
|
evil_fingers
Platinum Member 
Strike 1 - Inappropriate sig Joined: 27 March 2004 Location: Frisco Nor Cal Status: Offline Points: 7224 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 1:42pm |
Those 2 websites are totally useless to the question hes asking bout and as fer tryin to make a M24 from a 98c...it cant be done, but you can build a paintball shootin M24 from scratch and have tons of money and patience. |
|
|
|
|
Redstar
Member
Joined: 19 August 2004 Location: Canada Status: Offline Points: 144 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 2:09pm |
|
Grip: Just mill off the front grip, however I dont know if that would leave hole so.. if there's no hole: sand it, polish it, and paint it. if there's a hole: TIG weld an aluminum plate in (or get someone else to do it) then sand it, polish it, and paint it. Also, get a bipod, and combat stock, and a scope for the full effect of a sniper rifle. This would mean getting some sort of sight rail to mount the scope to. |
|
----My New 2004 M3 Discord Snowboard! ---- |
|
|
|
|
Master. kirby
Member
Joined: 26 October 2004 Status: Offline Points: 21 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 2:54pm |
|
Yah, I already have the bipod and scope figured out, but the thing is I need a stock that I can move the trigger internals into (i really don't know how to make one) and does anyone know if the trigger internals have like long enough wires or whatever to actuly move it over? Thanks for the help though. |
|
|
|
|
Redstar
Member
Joined: 19 August 2004 Location: Canada Status: Offline Points: 144 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 2:59pm |
|
Why do you want to move the trigger internals?
|
|
|
----My New 2004 M3 Discord Snowboard! ---- |
|
|
|
|
kcs24reed
Member
Joined: 21 August 2004 Status: Offline Points: 32 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 8:06pm |
|
i agree removing the front handle is not a problem what u can do is get a m24 stock if u have the money and incorporate the whole 98 body into the stock of the m24.provided you might have to do alot of dremel work but it will look great.im working on something similar but a m249 saw kit
|
|
|
|
|
kcs24reed
Member
Joined: 21 August 2004 Status: Offline Points: 32 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 8:07pm |
|
you can also remove the grip just below the trigger that most likely could hide the rest of the gun in the stock
|
|
|
|
|
kcs24reed
Member
Joined: 21 August 2004 Status: Offline Points: 32 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 8:09pm |
|
cut the hand holdy thing with a cut off wheel its not a big deal did it on my 98 cyclone feed project
|
|
|
|
|
warbeak2099
Platinum Member
So I said, "That is my foot!" Joined: 10 June 2002 Location: United States Status: Offline Points: 3225 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 8:26pm |
|
What you need for your conversion:
M24 Stock M98 Custom Drill/Dremel What you'd need to do: Basically you'd need to mill both the M24 stock and the M98c. The tuffest part would be relocating the sear/trigger assembly. The easiest thing to do would be to leave the sear assembly. Leave that area of the grip or replicate the internal area of the grip inside the stock. Then relocate the trigger to wherever it needs to be in the stock and link the two with a metal rod. Make it so when the trigger is pulled, the rod trips the sear. The rod would have to push forward on the front of the sear every time the trigger is pulled. You also do it with pneumatics. he trigger pulls back on a 3-way which actuates a ram which trips the sear. Or you could do it with electronics. The trigegr pulls back on the microswitch, sending the message to the board to open the solenoid, which would trip the sear. Blah blah blah so on and so on. |
|
|
MIDN 2/C, US Navy
LCE-SpyderMag | G-Force Pneumatic Mag | '99 RF Sniper II |
|
|
|
|
NascarKevin24
Member
Can’t Stop Swearing Joined: 21 August 2004 Location: United States Status: Offline Points: 292 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 9:30pm |
|
^^^ What he said The electronic way would be the hardest personally I think the rod way would be the easyest however your trigger pull would be hard as heck
Edited by NascarKevin24 |
|
|
|
|
|
|
Glassjaw
Platinum Member
Took down Mike Tyson Joined: 13 July 2004 Location: Philly Status: Offline Points: 6454 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 10:03pm |
|
Why not go for a cooler look like the VSS?
|
|
|
|
|
|
|
|
Skorpion317
Member
Joined: 26 February 2004 Location: United States Status: Offline Points: 241 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 November 2004 at 10:29pm |
|
about milling off the grips... it's not just the front grip he wants milled off. look at the picture of the M24 again. notice anything else missing? like the pistol grip of the 98C? that would have to go. |
|
|
98 Custom
Flatline Barrel Pro-Team Sniper F/X stock 32 Degrees Remote Line Response Trigger Ricochet 2K hopper Removed Front Grip Polished Internals Adco Imp red dot sight |
|
|
|
|
jfvalenti
Member
Joined: 01 December 2004 Location: United States Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 December 2004 at 1:18am |
|
I have a question...if you don't have any customization experience or skills, why would you try such a difficult project? If you have the metalworking, woodworking, pneumatics and mechanical/electrical skills, the job is actually not too bad. The toughest part is the sear, but it's not that bad. Edited to add: I'm not trying to put you or your idea down (it's actually a cool idea)...after I posted and re-read this, it sounded like I was. The hardest part of the customization will be done on paper first, before any wood or metal is cut or milled. Good luck, and post some pics if/when you get it done. Edited by jfvalenti |
|
|
|
|
A-5 Command
Member
Joined: 20 November 2004 Location: United States Status: Offline Points: 662 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 December 2004 at 5:02pm |
|
yea, dude, without any heavy modification to the internals, trigger, and grip, its basicly impossible, unless your good at changing everything inside of the gun. your better off by just getting a stock similar to that and holding it like you would if their was no pistol grip, kinda like thompson was designed (you could hold it like a rifle or a sub machine gun because of the way the stock was designed) Good luck |
|
|
|
|
evil_fingers
Platinum Member
Strike 1 - Inappropriate sig Joined: 27 March 2004 Location: Frisco Nor Cal Status: Offline Points: 7224 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 December 2004 at 6:55pm |
|
Jus contact Thompson Shooter, he can create a kit fer you (wit a price), he has the tools, equipment and the knowledge to create anything that involves guns, especially if it involves Tippmann markers.
|
|
|
|
|
GhilleMan
Gold Member 
Strike 1 - Language, 11/15 Joined: 10 October 2003 Location: United States Status: Offline Points: 1157 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 December 2004 at 8:19pm |
|
go for the look of a KAC SR-25, its a flattop reciever M-16 rechambered for 7.62 search for the israli specail forces website, they have a bunch of pics of one
trust me, it will be a lot easier, and still really cool |
|
|
Smart Parts, Stupid People... Go figure
Shoot To Thrill on stockclass, mcarter, and the dreadful pbn Carter Mini Comp, Carter Tricar, PPS Blazer |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Master. kirby wrote: