My self-custom painted A5

Because I am great at spraypainting:

And no, it really isn't all that shiny, camera flash does wierd things to lighting.

I painted the cyclone outsides to match.

It was a 6 hour job.

bluemunky42 wrote: it took you 6 hours to paint a hopper?

Because of the way I did it, yes.

That include the time it took taping it off, and applying anti-overspray plastic.

Basically, I took it apart, removed the cap and spring, and then put it back together with a shopping bag inbetween, then trimmed the shopping back down really close to the surface of the hopper, and used it to make an anti-overspray shield on the bottom hole of the hopper. Then taped off the connection part of it so that it would still fit in the cyclone properly. Also I used a Pringles lid to cover up where the cap would be so that there wouldn't be any overspray through there and so that the area the cap connects to wouldn't be sprayed over. Then painting took about half an hour because after the first try I realized that I didn't get ALL of the hopper, so I had to wait a little while and repaint.

Painting the cyclone exterior was a simpler process. I just unscrewed it from the side of the gun and then taped off everything that I didn't want painted (such as the tube, the internals, and wherever paint could go through cracks to get into the internals. Painting took about 5 minutes.

Not to good at all seriously.

Just the hopper naaaaa.