|
low fps ??? |
Post Reply 
|
| Author | |
El Zilcho 
Member 
Joined: 03 November 2004 Location: United States Status: Offline Points: 9 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: low fps ???Posted: 29 January 2005 at 7:22pm |
|
I have a 98c. It has an e-bolt, and I never had a problem. I just got a low pressure kit and now my velocity tops out at 250 fps. I have no leaks, my dwell and lpr are adjusted to specs, and my reg is putting out 500 psi. I know that the LPK should run at 300-400. Any ideas would be appreciated.
|
|
 |
|
|
Oedipus
Member
Joined: 30 January 2005 Location: Greece Status: Offline Points: 187 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 12:56am |
|
I"m not sure, but if you can, try bumping your Reg output up a little bit. That may fix your problem. |
|
|
|
|
El Zilcho
Member
Joined: 03 November 2004 Location: United States Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 7:25am |
|
I think that would fix my problem, but I would have to get a new reg. Then, with only a 200 psi difference, I should just get rid of the low pressure kit all together.
|
|
|
|
|
Oedipus
Member
Joined: 30 January 2005 Location: Greece Status: Offline Points: 187 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 12:13pm |
|
What reg do you have on it?
|
|
|
|
|
El Zilcho
Member
Joined: 03 November 2004 Location: United States Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 1:13pm |
|
Shocktech in-line 150-500 psi with a smart parts gauge
|
|
|
|
|
98c Dude13
Member
Joined: 18 June 2004 Location: United States Status: Offline Points: 2082 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 4:40pm |
|
Your problem is because all tippmanns run on 800-850psi.
|
|
|
TIPPMANN 98 CUSTOM
14" Progressive barrel 32* Black gel grips BT-16 Double trigger Pen Spring Mod X-core Expansion Chamber Vertical Adapter |
|
|
|
|
triggerhappy1
Platinum Member 
Joined: 07 May 2004 Location: United States Status: Offline Points: 3376 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 6:07pm |
|
^ he has the LPK which makes it operate around 400psi. do you use HPA, or co2? if its cold out, co2 wont give you much pressure after the tank cools. maybe not even over 400psi. so keep your tank inside for a while, or soak it in warm water, and give it a try. when winter is over and its warm, try chronoing again. also add some oil. |
|
|
|
|
|
|
El Zilcho
Member
Joined: 03 November 2004 Location: United States Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 6:41pm |
|
I have a 850 pre-set tank, and plenty of oil. Could there be something wrong with the low pressure kit? |
|
|
|
|
triggerhappy1
Platinum Member
Joined: 07 May 2004 Location: United States Status: Offline Points: 3376 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 January 2005 at 6:51pm |
|
its a possibility. there could be something wrong with the valve or drive spring. but you said the dwell is set good, so thats ruled out. if anything, its your reg. do you have a gauge on it to tell you exact pressure? also, have you messed with your velocity scre at all (if there is one on LPK)? |
|
|
|
|
BobbyG
Member
Joined: 09 January 2005 Location: United States Status: Offline Points: 160 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 January 2005 at 1:11am |
|
Get the Maddmann Spring kit and run the Red Spring ( stiffest ) . I run a A5 with that spring and and run my gun at 280-300psi with the low pressure kit. Adust your velocity screw all the way up and use the reg to adjust your velocity.
Edited by BobbyG |
|
|
My A-5 :
|
|
|
|
|
LordJovian
Member
Joined: 01 June 2004 Location: United States Status: Offline Points: 1882 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 January 2005 at 8:30am |
|
More than likely your drive spring is bent or has lost tension some how. You can get a new drive spring, or order a stronger one. Also polish your internals to drop the pressure more. You can get the pressure fairly low and still have the right fps. It just takes a few mods. Or, get the maddmann spring kit from a site like County paintball or 888paintball or search the net for one. |
|
|
A-5
E-grip Chipley Custom Carbon Graphite 16" Evil Adapter(Spyder) 32 Deg New '03 XChamber Remote Line Gun Sling Sniper f/x Stock LPK 68/4500 HPA R-5 CP Reg JCS Duel Trigger |
|
|
|
|
Clark Kent
Platinum Member
Joined: 02 July 2004 Location: United States Status: Offline Points: 8716 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 January 2005 at 9:32am |
|
You might try turning DOWN your regulator. It is possible to put too much pressure into a gun, to the point of reducing efficiency. See if you don't gain some fps by putting the reg down to 400 psi or so. Other than that, I second the drive spring suggestion. And, just to make sure - did you install ALL the pieces with the LP kit? In particular, did you install the new lighter hammer/rear bolt? Using the LP kit with the stock hammer could give the result you are experiencing... Good luck. |
|
|
|
|
El Zilcho
Member
Joined: 03 November 2004 Location: United States Status: Offline Points: 9 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 January 2005 at 11:45am |
|
My gun has an e-bolt, it does not have a drive spring.
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options