Boydster’s new ULE Automag (NEW PICS)

Grand finally at the end.
------------------
   Former guns
------------------

Let's start with my old Tippmann 98 Custom. It was bought stock and upgraded from the ground up. All modifications were done by my father and me. It was sold on eBay over this past summer for $423 dollars.

~~Mods~~
-Double trigger stop
-Elbow wobble fix
-Polished internals
-Tapped R/T hole for single trigger stop
-Trigger slop mod
-Sear spring silencer
-Lighter trigger pull
-Receiver blowback vents, 4 of the 5 have been filled with Epoxy and painted.
-LED Light
-Standard bolt has urethane O-ring reducing blowback gases

~~Accessories~~
-Black Magic cup seal
-Toxic Performance double trigger, chrome
-J&J 12 inch Ceramic barrel
-DOP long drop forward
-Stainless Steel bolt kit
-Maddman spring kit
-StarFire bolt (Bad news!)
-Dead On Rocket Cock II
-GTA Inline expansion chamber
-GTA Flatline barrel system

------------------

Next up is my A-5. It was sold about two weeks ago on eBay. I bought it used with a few accessories. It's got more now and it's in better shape then when I bought it. It sold for $460 dollars.

-Egrip
-12 inch Lapco Bigshot
-12 inch J&J Ceramic
-Male Palmer Regulator
-Bob Long micro gauge
-Dead On rear velocity adjuster
-NW 8 inch Spoon drop forward
-Lapco Foregrip
-Lapco grip block
-JCS duel trigger
-BSA red dot site

------------------
And on to the two guns I have now.
------------------

This was my first Automag. I bought it used on eBay for $119 dollars. I have an upgraded fancy version of it and I have an old school version of it. I prefer the old school one though. The main supply of air for the Classic mag is CO2. Fancy version first....

-68 Automag Classic
-PFHL main body
-WGP Torpedo drop
-X-Core
-Macro line and Stainless line with quick disconnect
-Level 10 bolt
-Reactor on/off
-wooden grip with double trigger
-12 inch SP Progressive barrel
-12 inch Dye Xcel barrel
-TASO RVA
-Z-Valve on/off

------------------

And now.... my pride and glory..... The ULE Automag!
I bought it for a used price but it is brand new! I paid 225 for everything but the tank, drop, and body. The guy I bought it from had found a great deal on an Autococker and went ahead and bought it. That put him in debt so he had to come up with money fast...
He had already sold his ULE body so I had to find one separately. I ended up buying this one for $85 dollars on the AO forums. I already had the WGP Torpedo drop and I already had the X-Core. Why an X-Core expansion chamber you say? Well, DOP claims this expansion chamber is built for maximum expanding of CO2, while still allowing HPA to pass by with minimum blockage. While I have the X-Valve on, the HPA runs through the expansion chamber. But if I don't have any N2, I can easily put the Classic valve on and run CO2. The CP barrel has a scratch on the inside so I need to find another barrel to replace this. The stock Cocker barrel is presently more accurate than this. Here it is....

This gun originally came with a reverse X-Valve. Since I wanted to be able to switch out the X-Valve with the Classic valve, I needed a standard, air fed right, valve. I traded it for a standard one on the AO forum. Here's a pic of what it looked like with the Reverse X-Valve....

Tell me what you think!

 

EDIT: Here's the warp set-up. The guy I bought my gun from gave it to me for free.

Edited by Boydster

f@ll3n 5nip3r wrote: noice i want a mag

Soo Do I

I like your new mag the best. That is a nice mag

I forgot to ask in the first post how fast can you shoot and does the new Mag have a lvl 10 bolt kit.

I'm the dude that traded him valves. That's my valve on there, I'm so proud...*wipes tear*....But I like reverse valves.

Boydster wrote: Hey TRB! (<- trains are bad) Didn't know you were a member here. nforcer4, I'd be honored to be on your list lol. Yes I want in! Nope, don't have the reverse anymore. Yes if you had the reverse your line would not cross over. But, umm, you could just switch your unimount over to the right side. Then it wouldn't have to cross over sides. And if you got a right air xvalve, you could swap your Classic valve and X-Valve out anytime hassle free. That's exactly why I traded for the standard one.

if i did my uni mount like that the macro line is on the right side and it would rub my hande on the I-frame so if it was on left my fore grip hand wouldn't touch and i wouldn't be swapping because i'm tradeing my valve in to make the xvalve more affordable for me the site will be up in a sec ill link yea soon and make a thread on it soon if i forgot to say yea you need a glossblack frame but not if your gonna loose alot of money.

hey thnx i needed my valve extra too  for my other mag heres the link to my light me me with the info you want with it thnx again
">http://www.geocities.com/tcxchris/TFAOMainPage.html?1 106 985899156

The better link is gonna be working soon it's gotta be reggestered but it will be

http://www.tfao.tk


Edited by nforcer4

ill pass them all in a few weeks no worries and cabinefreak is selling his lol
my gun will be looking NOICE in a few weeks i'm saving xavalve for a few weeks after that kinda a best for last thing if ya know what i mean

my msn is on the site hehe take all the time yea need

no bst in these forums. consider this a warning. carry on