RT Mag advice

 

I guess, I meant the Dye is an upgrade in that is isn't the stock CF single trigger frame. I personally am a fan of double triggers, so IMO it's an upgrade. I have seen some posts complaining that they tended to feel sloppy though, and they don't seem to fetch the same resale as the Intelliframe. I personally have no experience with them, but have seen them popping up lately. I actually bid on a marker awhile back and had to rescind my bid because it ended up having a dye frame instead of the intelli, but only because I had plans on parting it out.

And I guess slow as in it isn't RT'ng, slow to reset...? Tin, you may need to get an adjustable tank for it to really RT. I use an adjustable Centerflag reg and have it set around 950-1k. It bounces pretty well. Not so much on a non-adjustable. Oddly enough, it all depends on the valve. Some just seem to bounce more than others.

 

If it is recharging slowly, make sure you have it turned up enough and watch the space between the back of the trigger and the pin. It should be adjusted out so that there is about a business cards space when gassed up.

 

OPBN, after looking through AO I realized I didn't have an RT sear.

It acted like a Tippmann RT with a leak, it just nudged my finger but not enough to reset it.

I located a sear and am waiting for a reply.

 

Mack, I haven't shot it yet. I'm still in the cuddling stage, petting it and calling it "my precious" .

 

RT sears only go with RT rails, but you do not have to have an RT rail with an RT valve. Or a RT sear with an RT valve. Unless it's a classic RT and then it must be a classic RT rail.  In fact, an RT sear will not fit the rail that you have.... I can post up some pics if you need.