3D Manual (98 and A5 so far)

I always thought it would be cool to have a thread with real actual pics of a gun's internals and how it goes together and that stuff. So I made one.

I know that Enos has his parts guide, and I know that there are manuals and stuff, but for some stupid people like me who suck at reading manuals (or are too lazy to read them) it is easier to just look at the real pictures of the gun.

Anyone feel free to make guides of any Tippmann guns that aren't already in here, or how to install any upgrades that aren't already in here.

____________________________________________________________ __

Here's my guide for my 98.

Down near the bottom of the page Baratak (Thanks a ton man!) posted a link to a guide he made for the A5, it's really elaborate, check it out.

____________________________________________________________ __

Here's my 98 custom and a short sumary and explaination of the parts and stuff.

Sorry for the HUGE files........

Link to Picture

WAM! Here's my 98 in all it's glory.

I circled the bolts that you need to take out in yellow. I also circled the rubber cap on the cocking knob, you need to take it off too before you lift up the left reciever side (I learned that the hard way). You also need to unscrew the bolts that hold in your ASA or drop before you lift up the left reciever side. Make sure you put all bolts somewhere they wont get lost (in a bowl or plastic baggie works good).

Link to Picture

Here is the insides of it before I took out anything. Just a pic to show what it all looks like.

Link to Picture

Here's the front of the gun including the ball detent and front sight assembly. I had to take this one since the first one cut off the front of the gun. Notice how the ball detent sits in the gun.

Link to Picture

Basic stuff here. You will want to oil all these parts and their O-rings (except the ball detent). This is the exact position these parts should be in when they fit into the gun.

Link to Picture

Again, pretty self explainitory. To remove the endcap simply lift it up and let it kind of pop off the grooves that it sits in. Then you can remove the drive spring and guide pin, along with the cocking knob, buffer O-ring, rear bolt, and rear bolt guide. This is the exact position these parts should be in when they fit into the gun.

Link to Picture

Basic trigger assembly (without sear and sear spring)

Link to Picture

Complete trigger assembly. If you ever need to take these parts out, it's a good idea to put them into a bowl or something so they don't get lost.

Link to Picture

DO ONT REMOVE THESE! These are the powertube bolts, you don't need to remove them for general maintainence or cleaning.

Link to Picture

This is the powertube, it's what the powertube bolts hold in. You don't need to take it out for general maintainence or cleaning. To clean under it you can slide a shop rag or paper towel under the front bolt guide.

Link to Picture

This is basically just how the ball detent sits in the gun. I showed this just because a lot of peole put it in backwards.

Link to Picture

Trigger pins alone.

 

As far as maintenance, all you really need to do is wipe down all the moving parts and the reciever halves, then oil them up again. Make sure to oil all moving metal parts and all the O-rings. Then, after reassembly, all you need to do is put a few drops of oil into the ASA and then dry fire without paint or a barrel a few times.

 

If anyone else feels like taking apart their guns and making a sort of  "3D guide" like I did, you can just post it here. That's the main purpose I created this thread and made it a sticky.

 

If this isn't "sticky worthy" just let me know, or a MOD can unsticky it.

*EDIT* I think I fixed it now.

 

 

Edited by EYES

Fixed now.

Edited by EYES

WAM! I fixed it, YAY!

Edited by EYES

Everything works now.

So what do you guys think? The start of a good sticky thread?

Edited by EYES

Well, that was my intention in creating this thread, unfortunately, I don't own any Tippmann guns besides my 98. I was hoping other people would do like I did and make more "3D manuals" and post them here, that was my whole idea.

So anyone else who has time on their hands if you want to make a manual like I did post it here.

wait that o ring in the back is there for a reason? it got lose and i just removed it on my dads model 98. opps ill fix that

hi, i bought a verticle adapter and could somebody show me a pic of how it would look all together and how u would put it in,, thanx

could anybody give me a pic of what a powerfeed system would look on a 98c... because i would like to know if u still need a hopper of would that powerfeed just hold the balls

I've posted these from time to time.
to see pics on how to take the A-5 apart/put back together Click Here.

Put in a new address... Yahoo changed the page

It's amazing no one ever finds these.

It even in the other sticky

Edited by Baratak

no that kind of a powerfeed system... one of the new ones that are like $190. the really expensive ones